IFOOTAGE 31" Carbon Fiber Camera Slider Track Video Stabilizer Rail 6 Bearings Professional DSLR Camera DV Video Camcorder Film Photography, Load up to 15.5 pounds - Shark Slider S1(S1S)

IFOOTAGE is redefining design for camera equipment. Our customers include professional filmmakers, nature and landscape photographers, documentary filmmakers, wedding and event photographers, studio photographers, a wide range of video content providers, and amateur video and photography enthusiasts.

Six long-wearing bearings provide a longer life (about 5 times longer than other brands). This device will operate smoothly and quietly for a lifetime.

Synchronous belts provide high precision and high torque; synchronous wheel clearance is nearly zero; and torque is much higher than ordinary XL belts.

Made of top of the line carbon fiber material; knitting technology of 14 layer 100% (thickness is 2.5 times the ordinary carbon fiber tube). This construction ensures durability, which, along with stainless steel joints, and a carbon tube concentricity within 0.01mm, ensure this is one of the smoothest sliders on the market.

Foot rests are designed for use on uneven ground. To use, simply loosen the lock on the side to release the foot reset. Rotate it to adjust the angle of the slider, and further adjust the height by twisting the rubber tip and locking securely.

Both sides are equipped with 1/4" and 3/8" screw mounts. This slider can be connected to a video monitor or other external devices, which greatly improve the flexibility of this device.

After a long periods of use, without dissembly, the slider rails may loosen due to temperature differences and external impact. This can be easily fixed by adjusting the rail clamps underneath the main body. Unlock the clamp buttons and adjust for a snug fit.