YPLANG Screen Replacement for iPhone X Screen Replacement OLED [NOT LCD] Display 3D Touch Digitizer Frame Assembly Full Repair Kit

Only for iPhone X 5.8', Not for XR XS XSMAX .
The screen replacement is without Ear Speaker, Front Camera, Proximity Sensor and Home Button, so please swap them out from your old screen and install them. 
Note: 
1. Don't press four corners and be careful when lock screws, otherwise it will cause inner glass broken. 
2. Make sure each screw is installed back to its original hole. 
3. Be gentle and cautions to the flex cable connectors when installing. 
4. Please check the OLED and make sure the flex cable is in good condition and there is no debris on the connector. 
5. DO NOT over-bend or use excessive force to tear it. 
6. Please please disconnect battery flex cable of your phone before you install our new screen, this is very important. Otherwise, the screen will not turn on.
Problem Solution
If your phone has some problems after installed. For example, cannot turn on, no touch, no home button function, flashing, lines on screen etc., please follow these steps: 
1. Reinstall all flex cables from the motherboard and double check all flex cable is in good condition. 
2. Restart your phone: Reset the phone by holding both Power and Home button together pressed for min 15 sec, after few mins, turn the phone on. Or reconnect your battery. 
Package Include: 
Pre-installed OLED screen, installation manual, 3 x Magnetic screwdrivers, crowbar, wiper, suction cup, screen protector, SIM card opener and plastic triangle opening tool.