Wireless Car Charger 15W Fast Charging Touch Sensing Auto-Clamping Car Wireless Charger Air Vent Clip Car Phone Mount for iPhone SE/11/11 Pro Series/X/XR/8, Samsung Galaxy S20 S10 Note10/9 (Q1-Blue)
Availability: In Stock
*⚡ AUTO-CLAMPING SENSOR ARM - The automatic-clamping feature enables you to mount or retrieve your phone with one hand motion. Just sensor one of the two release buttons on the back to open the arms automatically（NOTE: when the power is connected） once the phone is in the arms will automatically close to secure your phone. The built-in energy storage setting allows you to open the arms to take your phone out within 10s-20s even after the power supply is disconnected or your car is stalled.
*⚡ 15W FAST CHARGING - Qi certified support up to 15W output to the Qi enabled smart phones, backward compatible with 10W, 7.5W and 5W output for sure, while QC 2.0/QC 3.0 or PD car charger is required for getting the phone fast charged. Charging distance up to 0-8mm, no need to take off the case while fast charging (except the cases with rugged surface and metal covered).
*⚡ STABILITY & SSFETY - Each clip of the stand uses soft silicone, non-slip, shock absorption, and also protects the car vents or phones from scratches. The car phone holder can be used for phone with a thicker phone case (less than 5mm), which it can be charged quickly and stably. Even on the bumpy roads, there will be no power failure and it can keep the phone stable. No need to worry about sudden braking, rapid acceleration and bumps.
*⚡ THICK CASE FRIENDLY - No need to remove phone case (most of phone cases in the market except rugged, uneven case, no metal.)while charging.The car holder can hold all phones with a width of 60-80mm tightly, which works very well for all QI-enabled phones.
*⚡ MAXIMUM COMPATIBILITY - 10W Fast Charger for Samsung S20/S10/S9/S8/S7/S6/Note 5, 7.5W Fast Charger for iPhone 11/11Pro/XS max/XS/XR/X/8, Charging for HUAWEI Mate series(10W/7.5W fast charging requires a QC2.0/3.0 adapter); 15W/5W standard wireless charging for other Qi-enabled Phones (5V/2A adapter is required) The adjustable support Foot helps align different sizes of phones for efficient wireless charging.
⚡ Free Gift:USB QC 3.0 Car Charger(Refer to The Main Picture)
Model: Q1
Input: 5V/2A; 9V/1.67A; 12V/1.67A Output: 5V/1A; 9V/1.12A; 9V/1.67A
⚡ Large Capacitance: The built-in energy storage setting allows you to open the arms to take your phone out within 10s-20s even after the power supply is disconnected or your car is stalled.
⚡ Operating Temperature: -10 to 60℃ Charging power: 15W (max), 10W, 7.5W and 5W Charging efficiency: up to 75% Charging distance: up to 6mm
⚡ Over Temperature Protection: Temperature over 60℃, the device will stop charging automatically and the transmitter light will flash red, and the device will recharge automatically when the temperature get down to 40℃
⚡ Over Voltage Protection: The device will stop working under below input voltage situation, 6V for 5W charging, 11V for 10W charging, 13V for 15W charging.
⚡ Over Current Protection: The device will stop working under below input voltage situation, 1.9A for 5W charging, 1.6A for 10W charging, 1.65A for 15W charging.
360° rotating ball helps you to find the most suitable angle for safe driving. Touch the top sensing area softly, the clips will be released automatically, then get the phone.
Note:
1.Fast charging requires for QC 3.0 / 2.0car charger
2.Metal attachments, expandable grips, or credit cards will interfere with charging. Cases that contain metal, such as Pitaka, Evutec, and Spigen QNMP, will trigger foreign object detection and interrupt charging. Rubber/Plastic/TPU cases under 4 mm thickness only.
3.This wireless car charger install on air vent.
4. Do not over-squeeze or hit the device.
5. Do not use the wireless charger under severe high temperature,humidity or corrosive environment to avoid damaging the device’s circuit.
6. Devices that do not support wireless charging need to purchase QI-compliant wireless receivers before they can be used.
