2600mAh [Upgraded] Battery for iPhone 6S, LCLEBM Higher Capacity Battery Replacement for iPhone 6S Model A1633, A1688, A1700 with Complete Tool Kits and Instruction Only for Battery iPhone 6S

2600mAh [Upgraded] Battery for iPhone 6S, LCLEBM Higher Capacity Battery Replacement for iPhone 6S Model A1633, A1688, A1700 with Complete Tool Kits and Instruction Only for Battery iPhone 6S

Product Code: WGA18069
Availability: In Stock

US$11.25

For Bulk Order, Get Better Price.

*Select the ship method

Description

Apply a suction cup to the lower left corner of the display assembly.(Note : Take care not to place the suction cup over the home button)Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices and is held down with adhesive. (Note : Pulling too hard may damage the display assembly. Apply just enough pressure to create a small gap between the display assembly and the rear case.)Dont open the display more than 90º, as it is still connected at the top by three cables that may break if stretched.When reconnecting the digitizer cable, do not press the center of the connector. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage.Installing the cable connector of new battery, make sure the connector is fastened and will not loosen, avoid your phone charging low than at 50% or cannot charge.When use tweezers to peel back the tips of the two adhesive strips along the bottom edge of the battery.(Note: Use your fingers or blunt tweezers. Be careful when working near the battery; puncturing a lithium-ion battery can release dangerous chemicals and/or cause a fire.) Battery Capacity: 2600mAh Battery Type: Lithium Polymer Charge Limit Voltage: 4.35V Watt-hour: 9.93Wh Voltage: 3.82V